This document is part of Standard Specifications -- English Units.

The Table of Contents for this section is available.

SECTION 1252

PERMANENT RAISED PAVEMENT MARKERS

1252-1 DESCRIPTION.

The work covered by this section consists of furnishing, installing and maintaining permanent raised pavement markers in accordance with the plans and specifications.

1252-2 MATERIALS.

The provisions of Article 1250­2 shall be applicable to the work covered by this section.

All materials shall meet the requirements of Division 10 shown below:

Permanent Raised Pavement Markers Article 1086-2

1252-3 CONSTRUCTION METHODS.

The provisions of Article 1250­3 will be applicable to the work covered by this section.

Permanent raised pavement markers shall be installed using a hot bitumen adhesive in accordance with Article 1081­7.

1252-4 MAINTENANCE.

The Contractor shall be responsible for maintenance of the permanent pavement markers prior to acceptance.

1252-5 METHOD OF MEASUREMENT.

The quantity of permanent pavement markers to be paid for will be the actual number of pavement markers which have been satisfactorily installed and accepted by the Engineer.

1252-6 BASIS OF PAYMENT.

The quantity of permanent raised pavement markers, measured as provided in Article 1252­5, will be paid for at the contract unit price each for "Permanent Raised Pavement Markers (color)". Such price and payment will be full compensation for all work covered by this section, including but not limited to furnishing, installing and maintaining permanent raised pavement markers.

Payment will be made under:

Permanent Raised Pavement Markers (color) Each