Review Density Other Conventional

Version 8.2 Changes

Added a new status Complete - Too Rocky to Run. When a user chooses this status, the Percent Compaction will default to 0.0%. A comment may be entered but it is not required.

Modified the system to require an entry in the Right or Left field only when the Distance From Center value entered is not zero.

Modified the window and system to allow Density test information to be recorded at the Contract level rather then by Material and Line Item. Soils Density tests will now be associated to a Soils Density Category/Sub-Category rather then to a Material/Line Item combination. Existing data will be converted to the new Category/Sub-Category values as part of the 8.0 release implementation.
The window has been enhanced to allow creation of a PAR for failing Density test results.

The size of the Test Number field has been increased from 3 numbers and a letter to 4 numbers and a letter. This will allow test numbers greater than 999Z to be entered.

Corrected the default Status to correspond to the values entered in the 'Materials' table. The density status will default to 'Meet Specs' if the Per Cent Compaction of the test is greater than or equal to the required density Per Cent and is less than or equal to 100%.

The Other Conventional Density information is now sorted in descending order by Test/Test Type when the window is opened. Newly inserted rows will appear at the top.

The Field Density Materials must be added to the Contract Bill of Materials before Density results can be entered. The Field Density Materials are:
- Field Density - Aggregate Base Course
- Field Density - Embankment
- Field Density - Subgrade

Page last updated 30 September 2011